Brother TL-848A Manual De Propietario

Programmer

Items to be set are as follows:

Extended option output number

Specify a number out of 1 - 16. Refer to "Table of extended option
output" (Refer to page 205 .)

Operation setting

Select one out of ON, OFF, FLIP and FLOP with 

 .

Output condition

Input conditions for the extended option output. 3 conditions can be
specified. Refer to "Table of extended option output"
(Refer to page 205 .)

Timer 1

Set the time until the output varies after the output condition is established.

Input the value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set.

Timer 2

Set the time for implementation of the extended option output. Input the
value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set.
When the value is 0, the output remains varying.

When setting is complete, be sure to press 

 .

To cancel the set value, input 

0

0

0

 and press 

P

.

To register the setting into the machine, carry out operation of "Writing the extended

option output data" (page 199).

Operation setting

Output condition

Timer 2

Timer 1

Extended option output No.