Emerson Liebert iCOM Manual De Usuario
Service Menu Parameters
143
Liebert
®
iCOM
®
Figure 129
Diagnostics/service mode screen, page 3 of 8
S324 Electric Heat 1 (or HG/HW)—Activates Stage 1 of the unit’s reheat system.
S325 Electric Heat 2 (or HG/HW)—Activates Stage 2 of the unit’s reheat system.
S326 Electric Heat 3 (or HG/HW)—Activates Stage 3 of the unit’s reheat system.
S327 SCR Heat—Specifies the pulse width the heating system should run at on units using silicon
S325 Electric Heat 2 (or HG/HW)—Activates Stage 2 of the unit’s reheat system.
S326 Electric Heat 3 (or HG/HW)—Activates Stage 3 of the unit’s reheat system.
S327 SCR Heat—Specifies the pulse width the heating system should run at on units using silicon
controlled rectifier type reheat.
S328 Dehumidification Output—(Read Only) On/Off status of dehumidification.
S329 Humidifier Fill—Activates the humidifier water source solenoid valve, which fills the
S328 Dehumidification Output—(Read Only) On/Off status of dehumidification.
S329 Humidifier Fill—Activates the humidifier water source solenoid valve, which fills the
humidifier pan or canister with water.
S330 Humidifier—Activates the entire humidifier system.
S331 and S332—Not applicable to Liebert North America units.
S333 Q15 Output State—Read-only; On/Off status of Q15.
S330 Humidifier—Activates the entire humidifier system.
S331 and S332—Not applicable to Liebert North America units.
S333 Q15 Output State—Read-only; On/Off status of Q15.