Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF Manual De Usuario

Join/Prune interval : 60 Inactivity interval : 180

Hardware Drop Enabled : Yes Prune Wait Interval : 3

Bootstrap Msg interval : 60 Candidate-RP Msg interval : 60

SSM Enabled : Yes SPT Threshold : 1

SSM Group Range : ff30::/32

Route Precedence : mc-non-default mc-default uc-non-default uc-default

Embedded RP Enabled : Yes

Displaying system values

To display default, maximum, current, and configured values for system maximum parameters, use
the show default values command. The following output example does not show complete output; it
shows only PIM6 hardware mcache values.

device(config)#show default values

System Parameters Default Maximum Current Configured

pim6-hw-mcache 512 1024 1024 1024

Displaying PIM Sparse configuration information and statistics

You can display the following PIM Sparse information:

•

Basic PIM Sparse configuration information

•

IPv6 interface information

•

Group information

•

BSR information

•

Candidate RP information

•

RP-to-group mappings

•

RP information for an IPv6 PIM Sparse group

•

RP set list

•

Multicast neighbor information

•

The IPv6 PIM multicast cache

•

IPv6 PIM RPF

•

IPv6 PIM counters

•

IPv6 PIM resources

•

IPv6 PIM traffic statistics

Displaying basic PIM Sparse configuration information

Enter the show ipv6 pim sparse command at any CLI level to display IPv6 PIM Sparse configuration
information.

Brocade# show ipv6 pim sparse

Global PIM Sparse Mode Settings

Maximum Mcache : 4096 Current Count : 7

Hello interval : 30 Neighbor timeout : 105