Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF Manual De Usuario

ip mroute next-hop-recursion

Configures the recursion level while using static mroutes to resolve a static mroute next hop.

Syntax

ip mroute [ vrf vrf-name ] next-hop-recursion 1-10

no ip mroute [ vrf vrf-name ] next-hop-recursion 1-10

Command Default

The recursion level for resolving a static mroute next hop is 3.

Parameters

Configures a static mroute for this virtual routing and forwarding (VRF) route.

Modes

VRF configuration mode

Usage Guidelines

The no form of this command restores the default recursion level for resolving a static mroute next hop.

Examples

This example sets the recursion level for resolving a static mroute next hop to 7:

Device(config-vrf)# ip mroute next-hop-recursion 7

This example sets the recursion level for resolving a static mroute next hop to the default value, 3:

Device(config-vrf)# ip mroute next-hop-recursion

This example disables the recursion for resolving a static mroute next hop:

Device(config-vrf)# no ip mroute next-hop-recursion

History

8.0.10a

This command was introduced.

ip multicast disable-flooding

Disables the flooding of unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN.

Syntax

Command Default

The switch floods unregistered IPv4 multicast frames in an IGMP-snooping-enabled VLAN.

Modes

Global configuration mode

Usage Guidelines

NOTE
This command is supported only on ICX 6650 devices.

The no form of this command enables the flooding of unregistered IPv4 multicast frames in an IGMP-
snooping-enabled VLAN.

ip mroute next-hop-recursion