Brocade Communications Systems Upgrade Pef IPMC5000PEF IPMC5000PEF Manual De Usuario

show ip multicast optimization

Displays Internet Group Management Protocol (IGMP) snooping hardware resource-sharing
information. You can configure it to display the availability of IP multicast (IPMC) group indexes in the
hardware and how it is been used and shared.

Syntax

show ip multicast optimization [ ipmc ]

Parameters

Specifies the IPMC group index.

Modes

Privileged EXEC mode

Usage Guidelines

NOTE
The show ip multicast optimization command is available only on ICX 7750 devices.

Examples

This example displays resource information showing that IPMC group index 4 is shared by two users
and the ports included in the set are 1/1/6 and 1/1/1:

Device(config-vlan-150)#show ip multicast optimization 

Total IPMCs Allocated:    0; Available: 8192; Failed:    0

Index    IPMC         SetId         Users         Set

   1.    4             0x161fcbd8        2 {<1/1/6>,<1/1/1>,}

   2.    1             0x161d0930       10 {<1/1/6>,<1/1/4>,<1/1/3>,<1/1/2>,

                                            <1/1/1>,}

Sharability Coefficient:  76%

History

8.0.10

This command was introduced.

show ip static mroute

Displays information for configured multicast routes.

Syntax

show ip static mroute [ vrf vrf-name ] ip-subnet mask

Parameters

Specifies a VRF route.

Specifies an IP address.

Modes

Privileged EXEC mode

Usage Guidelines

Only resolved and best static mroutes are added to the mRTM table. These routes are prefixed with an
asterisk in the output from the show ip static mroute command.

show ip multicast optimization