Braun Flex Integral 6525 Manual De Usuario

 

4

5

 

The LCD displays «control» and «charge» show 
the operation and charging conditions of the 
shaver.

• When the shaver is connected to the mains,

a plug symbol is visible on the LCD display 
«control».

• As soon as the cell unit is fully charged, a battery 

symbol will be visible on the LCD display 
«control».

• If the capacity of the cell unit has dropped

below 20 %, the battery symbol will flash in the 
LCD display «charge» in order to remind you to 
recharge the cell unit. The remaining capacity will 
then be sufficient for 2 to 3 shaves.

 

The shaver is delivered with the switch lock 
activated (position «

 

•

 

 lock»). Push the switch lock 

to position «

 

•

 

» before you shave for the first time. 

To avoid accidentally switching the shaver on, 
e. g. when travelling, push the switch lock to 
position «

 

•

 

 lock».

 

0 = Off

1 = Shaving with the pivoting head.

The pivoting cutting system automatically adjusts 
to every contour of your face.

2 = Shaving with the pivoting head locked at an angle 

(to permit shaving in difficult areas, e. g. under the 
nose).

3 = The long hair trimmer is activated 

(for trimming sideburns, moustache and beard).

 

If the cell unit is discharged, you may also shave 
with the shaver connected to the mains
(100 - 240 V 

 

Q

 

). (If the shaver should not run 

immediately, charge it with the switch on position 
«0» for approx. 1 minute.)

 

• We recommend to shave before washing, 

as the skin tends to be slightly swollen after 
washing.

• Hold the shaver at right angles (90°) to the skin.
• Stretch your skin and shave against the direction 

of beard growth.

 

• After shaving, switch the shaver off. Press the 

release button, take off the triple shaving frame 
and gently tap it out on a flat surface.

• Then thoroughly clean the duo cutter block

with the brush as well as the inner area of the 
pivoting head.

• About every four weeks, clean the duo cutter block 

with Braun cleaning agents.

 

To maintain optimum shaving performance,
you should replace the triple shaving frame or
the duo cutter block, when these parts are worn.