Brother S-7000DD Manual De Usuario

 

 

S-7000DD 

2

 
 
 
 
 
 
 

Machine installation should only be carried out by a 
qualified technician. 
Contact your Brother dealer or a qualified electrician 
for any electrical work that may need to be done. 
The sewing machine weighs approximately 32 kg 
(70lb). The installation should be carried out by two 
or more people. 
Do not connect the power cord until installation is 
complete. The machine may operate if the treadle is 
depressed by mistake, which could result in injury.

 

 
 

 
 

Secure the table so that it will not move when tilting 
back the machine head. If the table moves, it may 
crush your feet or cause other injuries. 
Use both hands to hold the machine head when 
tilting it back or returning it to its original position. If 
only one hand is used, the weight of the machine 
head may cause your hand to slip, and your hand 
may get caught.

 

 

・ 

Do not set up this sewing machine near other equipment such as 
televisions, radios or cordless telephones, otherwise such 
equipment may be affected by electronic interference from the 
sewing machine. 

 

・ 

The sewing machine should be plugged directly into an AC wall 
outlet. Operation problems may result if extension cords are 
used. 

 

・ 

The sewing machine should be carried by the arm and the motor 
cover by two people as shown in the illustration. 

* Do not hold by any part other than the motor cover. If this is not 

observed, it may result in damage to the sewing machine.

 

 
 
 

・ 

Hold section (A) with your foot so that the table does not move, 
and then push the arm with both hands to tilt back the machine 
head. 

 

 
 
 
 

1.  Clear away any tools, etc. which may be near the table holes. 
2.  While holding the face plate with your left hand, gently return the 

machine head to the upright position with your right hand. 

 
 
 
 

0475D

0476D

2101B

2089M