Westcott 1090 Prospecto

Light Modifiers

Page 1 of 2 

 

Questions? Please call 800.886.1689 or email 

info@fjwestcott.com

.    

      ©F.J. Westcott Company  

 

 

 

 

 

 

 

 

 

 

Master’s Brush 

Style: 1090  
 
 
Description 

Thank you for purchasing the “Master’s Brush / Accessory Kit”.  Enter a new realm of lighting and 
include depth and three-dimension to your subject instantly. 

ƒ  [1] 16” x 22” Soft Box 
ƒ  [1] Circular Inner Baffle 
ƒ  [4] Soft Box Rods 
ƒ  [1] Multi Layer Net Front  
ƒ  [1] Barn Door 
ƒ  [1] Standard Front Diffusion Panel 
ƒ  [1] Standard Square Inner Baffle 
ƒ  [1] Carry Bag 

 

 
Instructions 

1. 

Place the 4 steel mounting rods into the pockets located on the inside of your 16” x 22” Westcott 
softbox.  

 
2. 

Place the 4 steel mounting rods into your adapter ring using the holes located in the 12 o’clock, 
3 o’clock, 6 o’clock and 9 o’clock positions.  

 
3. 

Locate your 6 ¼” round inner diffusion baffle and attach to your soft box 

  

using the snaps. This inner baffle should be directly centered over  your light.  

 
4. 

Place the edge of the black net front onto the softbox recessing it in about 1”. 

 
5. 

Attach the barn door panel to the side of the soft box closest to your subject using the Velcro® 
tabs. The barn door panel can be adjusted back and forth by placing the Velcro extension 
pieces along the outer rim of the soft box.  

 
*** Please note your Master’s Brush will also come with a white standard square diffusion panel and 
square inner baffle.  This allows your Master’s Brush to be used as a standard soft box with these two 
pieces in place.  These pieces WILL NOT be used when using this unit as your Master’s Brush. 

 
 
 

 
Velcro is a registered trademark of the Velcro Co.