WatchGuard Technologies WatchGuard Firebox SOHO Manual De Usuario

Setting a WatchGuard Security Event Processor log host

78

The log messages may include time synchronizations between the 
SOHO and the WatchGuard Key Server, discarded packets for a 
packet handling violation, duplicate messages, time-outs for 
attempting to open the WatchGuard Feature Key Server, or return 
error messages.
Follow these steps to view these log messages:

1

With your Web browser, go to the SOHO System Status page 
using the Trusted IP address of the SOHO.  

For example, if using the default IP address, go to: http://192.168.111.1.

2

From the navigation bar on the left side, select Logging.

The Logging page appears and the Event Log is displayed in the lower 

portion of the page.

Setting a WatchGuard Security Event 
Processor log host

Setting a remote log host causes log messages to be transmitted to 
a WatchGuard Security Event Processor server (participating in a 
WatchGuard Firebox System

TM

 solution) preconfigured to accept 

logs from your SOHO. It has the advantages of saving local 
resources for other less memory-intensive tasks and puts the log 
host at the WatchGuard Firebox System site where customer 
support can examine logs at your request to troubleshoot security 
problems. 

1

With your Web browser, go to the SOHO System Status page 
using the Trusted IP address of the SOHO.  

For example, if using the default IP address, go to: http://192.168.111.1.

2

From the navigation bar on the left side, select Logging => 
WSEP Logging.

The WatchGuard Security Event Processor page appears.