WatchGuard Technologies WatchGuard Firebox SOHO Manual De Usuario
Configuring the SOHO WebBlocker
88
Configuring the SOHO WebBlocker
Use the WatchGuard SOHO Configuration pages to enable
WebBlocker, create a full access password for bypassing
WebBlocker, define an Inactivity Timeout which sets the duration
that the full access password is valid, define the categories you
want to block, and configure WebBlocker Groups and Users.
WebBlocker, create a full access password for bypassing
WebBlocker, define an Inactivity Timeout which sets the duration
that the full access password is valid, define the categories you
want to block, and configure WebBlocker Groups and Users.
Enable WebBlocker
Follow the instructions below to enable WebBlocker, create a Full
Access Password, define the inactivity timeout value, require that
your Web users authenticate (if your are using the Groups and
Users feature option).
Access Password, define the inactivity timeout value, require that
your Web users authenticate (if your are using the Groups and
Users feature option).
1
With your Web browser, go to the SOHO Configuration
Settings page using the Trusted IP address of the SOHO.
Settings page using the Trusted IP address of the SOHO.
For example, if using the default IP address, go to: http://192.168.111.1
2
From the navigation bar on the left side, select WebBlocker =>
Settings.
Settings.
The WebBlocker Settings page appears.