Bracketron Multi Vehicle Mount MVM-35-05 Manual De Usuario

MVM Instructions | 

Before you begin to form your MVM, please make sure it looks exactly 

the way it does in the top picture to the left.

To begin, use a marking pen to draw the lines on the MVM as depicted 

in red in the middle picture to the left. Note: See red lines in the middle 

picture for guidance.

Use a tin snips to cut along these lines. When the cuts have been made 

completely, continue by bending along the yellow lines in the middle 

picture. Make the inside bend fi rst. Make this a 90° angle. Next make 

the middle bend. Make this a 90° angle also. Finally make the outside 

bend. This also needs to be a 90° angle. If the bracket gets bent use a 

small hammer to pound out any imperfections. If the paint chips use some 

black paint to cover up the paint. 

Now go back to Step 3 on the previous page to fi nish installation.

The Bracketron MVM-35-05 mount is a modifi able mounting bracket. The illustrations on the left show how this mount should 

look during and after the modifi cation steps in order to fi t the listed vehicles on the front page of this manual. 

Many vehicle 

applications may not require any modifi cations to the mount. If this is the case it will be noted below and there will be no steps 

to follow on this page. 

 

© Bracketron Inc, 2007 All rights reserved.

The information in this document is subject to change without notice. Bracketron Inc. assumes no responsibility for any errors that may appear in this document nor 

do we assume any liability in connection with its use. This supersedes and voids all previous literature. Please contact the sales department for additional information. 

Bracketron Inc. will not be responsible or liable for damage to vehicles in the installation and or removal of this Bracketron Inc. mount. Bracketron Inc. will not be 

liable for personal injuries or damage to property resulting from a motor vehicle accident and or improper installation of this Bracketron Inc. mount. 

 Please see page 3 in this manual for PHS-

Bracketron Inc

 5249 West 73rd Street, Suite G, Edina, MN 55439 

tel:

  952-746-7775  

fax:

 1-800-660-1784  

toll free:

 1-866-237-4443

email:  

sales@bracketron.com

 web:

  www.bracketron.com

Note:

 The hole pattern on the face of the MVM maybe 

different then what is shown in the pictures.