Boxlight CP300T Manual De Usuario

Smart Classroom Operations Guide                 Academic Computing - College of Charleston 

                    revised: 1/10/2005:jpva 

Instructions for Boxlight CP300T  

•  The Computer will not turn on 

1)  CHECK the POWER SWITCH located INSIDE THE RIGHT 

CABINET OF THE NOVA STATION.  It should light up 

RED

 

to indicate that the computer is receiving power 
 

2)  If the Nova station has power, reset the computer by pressing the 

reset button on the front of the computer. 

 

 

 
 

 

3)  CHECK THE WALL OUTLET to make sure that the power is 

plugged in from the Nova Desk. 
 

4)  Check to make sure that the power connection in the back of the 

computer is firmly seated. 

 

5)  If you are unable to resolve the problem, CALL THE 

HELPDESK AT 953-3375.  Please use guidelines provided 
at the end of this Operations Guide to assist you when 
placing a Help Desk call. 

 

•  The computer is on but the image is NOT projecting on the 

•  The VCR is not projecting on the Screen   

•  The Projector Remote Control Unit does not work  

•  The Projection Unit will not turn on 

1) 

Turn the projector bulb on by pressing the Standby/On (green) 
button on the remote control. 

 

2) 

When turning on the projector, it takes about 30 SECONDS 
TO DISPLAY AN IMAGE.  If the IMAGE DOES NOT 
APPEAR after 30 Seconds:

 

3) 

Turn off the fluorescent lights in the room (they can cause 
interference with the remote) and begin at step 1. 

 

 

Power Switch