BC Time Recorder Simplex 100 Manual De Usuario

NSTALLATION

 

 

 

 

 

 
1.  At a height convenient for all members of the work force 

and within 6 ft. of a power outlet, use the mounting 
template to mark the points where the mounting screws 
for the Simplex 100 are to be installed. 

 
2.    Leaving 3/16 in. of screw shank exposed, screw two #8 
 

panhead mounting screws (not supplied) into place. 

 
3.    Hang the Simplex 100 from the mounting screws. 
 
4.  Screw a third #8 mounting screw (not supplied) into the 

lower left-side hole of the base and tighten to the wall. 

 
 
 
 
 
 

 
To Connect Power 
 
Connect the power cable to the clock by removing the cover, 
passing the cable up the channel in the rear of the unit, and 
plugging the adapter into the circular connector. 
 
 

•  Plug the AC adapter into the power outlet. 

 
Caution! 

Do not hold the clock when applying power.  The 
Simplex 100 performs a self-test which includes 
cycling the printhead. 

 
You are now ready to set up and program the Simplex 100 
(refer to the Programming section of this publication). 

 

Note:  Be sure to remove the release key before replacing the cover on the clock.