Brother FAX-878 Manual De Usuario

Please refer to these instructions for later reference and before 
attempting any maintenance.

■

Use caution when installing or modifying telephone lines. Never 
touch telephone wires or terminals that are not insulated unless 
the telephone line has been disconnected at the wall socket. 
Never install telephone wiring during a lightning storm. Never 
install a telephone socket in a wet location.

■

This product must be installed near an electrical socket that is 
easily accessible. In case of emergencies, you must disconnect 
the power cord from the electrical socket in order to shut off 
power completely.

■

If the machine becomes hot, releases smoke, or generates any 
strong smells, immediately unplug the machine from the 
electrical socket. Call your Brother dealer or Brother Customer 
Service.

■

If metal objects, water or other liquids get inside the machine, 
immediately unplug the machine from the electrical socket. Call 
your Brother dealer or Brother Customer Service.

■

This product should be connected to an AC power source within 
the range indicated on the rating label. DO NOT connect it to a 
DC power source or inverter. If you are not sure, contact a 
qualified electrician.

■

Always make sure the plug is fully inserted.

■

DO NOT use the machine if the power cord is frayed or 
damaged, doing so may cause a fire.

There are high voltage 
electrodes inside the fax 
machine. Before you clean the 
fax machine, make sure you 
have unplugged the telephone 
line cord first and then the 
power cord from the electrical socket.

Do not handle the plug with wet 
hands. Doing this might cause 
an electrical shock. DO NOT 
pull on the middle of the AC 
power cord. Doing this might 
cause an electrical shock.

After you have just used the fax 
machine, some internal parts are 
extremely HOT! Please be 
careful.