Brother 515 Manual De Usuario

T E L E P H O N E   ( V O I C E )   O P E R A T I O N

Press 

 to put a call on hold.

You can put down the handset without disconnecting the call.

Pick up the machine’s handset or press 

 

 to release

the call from hold.

Press 

 to insert a pause between digits to be dialled.

If your fax machine is connected to a PABX, you may need to insert an
additional number prefix (e.g. “9”) and a “pause” before each fax or
telephone number to gain access to the outside line. When you press

, a dash “-” will appear on the display. By storing a pause,

you can create a delay of 3.5 seconds.

If you have pulse dialling service, but need to send tone signals (for
telephone banking, for example), follow the directions below. If you have
touch tone service, you do not need this feature to send tone signals.

Lift the handset.

Press 

. Any digits dialled after this sends tone signals.

When you hang up, the machine returns to pulse dialling service.

When you share one line for your telephone and fax machine, in the F/T
(FAX/TEL) mode, the fax machine can determine whether an incoming
call is a fax or a telephone call.

Dial the number by using the dial pad or Quick-Dial keys.

The number you are dialling, or the name you have stored for One
Touch or Speed Dial is displayed on the LCD.

Press 

.

Pick up the handset when you hear the other end from the monitor
speaker. If you press 

before lifting the handset, the call will be

disconnected (Only for FAX-515).

On the FAX-525DT, you can now speak to the party at the other end
without lifting the handset when you hear the other end from the
speaker. Press 

Speaker Phone 

when you finish the conversation.