Worth Data RF Laser Manual De Usuario

31 

 
The LZ400-RF Laser has a rechargeable lithium ion battery built-in. 
 
When not in use, the RF Laser should be plugged into the supplied, regulated 
Worth Data 5V power adapter (DO NOT USE ANY Supply Except Worth 
Data), so that it will always be recharged. The built-in recharger is a smart 
charger, so you can't overcharge the battery and ruin it. A full charge takes 
about 3 hours.  
 
If you ordered the USB interface, the F10 power supply included with the laser 
is used for recharging, since USB does not usually require the power supply to 
power the Base Station (see page 6). The serial configuration will require a 
second Worth Data 5v power supply if you want to keep the Base Station 
powered up at all times. You can get by with one power supply by simply 
unplugging the Base Station so you can recharge the RF Laser Reader.