WindChaser PACRWC-HP Manual De Usuario
Front View
1. Control Panel with LED Display
2. Adjustable Dial: Thermostat and Timer
3. Adjustable Vertical/Horizontal Louvers
4. LED Display
5. Handle
6. Remote Control
1. Control Panel with LED Display
2. Adjustable Dial: Thermostat and Timer
3. Adjustable Vertical/Horizontal Louvers
4. LED Display
5. Handle
6. Remote Control
Rear View
7. Air Outlet Hose
8. Evaporator Air Intake
9. Air Intake Hose
10. Hose Connectors
11. Water Drain and Plug
12. Power Cord
13. LCDI Plug
7. Air Outlet Hose
8. Evaporator Air Intake
9. Air Intake Hose
10. Hose Connectors
11. Water Drain and Plug
12. Power Cord
13. LCDI Plug
4
PARTS
1
2
3
4
5
6
7
8
9
10
11
12
13
or
9
10. TIME ON
To program the timer, press Timer On button until the
Main LED display shows a flashing ‘ ’.
Main LED display shows a flashing ‘ ’.
11. TIME OFF
Press Timer Off button and the Main LED display will
show a flashing ‘ ’.
show a flashing ‘ ’.
12. HR
Press to set the desired hour setting.
13. MIN.
Press to set the desired minute setting.
NOTE: ALL SETTINGS CAN BE VIEWED ON THE REMOTE
DISPLAY
DISPLAY
SETTING THE UNIT TO TURN ON AND SHUT OFF
AT A DESIRED TIME.
AT A DESIRED TIME.
Press the TIME ON button once, to set the start time of
the unit. Press the TIME ON button again to cancel this
setting.
Press the TIME OFF button once, to set the end time of
the unit. Press the TIME OFF button again to cancel this
setting.
the unit. Press the TIME ON button again to cancel this
setting.
Press the TIME OFF button once, to set the end time of
the unit. Press the TIME OFF button again to cancel this
setting.
To set specific TIME ON
1. Press the TIME ON button once
2. Select the desired hour and minutes you want the unit
1. Press the TIME ON button once
2. Select the desired hour and minutes you want the unit
to turn on again.
-To set the hours, press the HR button once, advancing
the timer 1 hour, continue to press this button, the clock
will add by 1 hour until extended to 11 hours, then will
change to PM or AM and return to 0 (12:00). When the
timer advances to 11, the next press will return the timer
to either 12:00 am or pm.
will add by 1 hour until extended to 11 hours, then will
change to PM or AM and return to 0 (12:00). When the
timer advances to 11, the next press will return the timer
to either 12:00 am or pm.
-To set the minutes, press MIN button once, the clock will
add by 10 minutes, continue to press this button. The
clock will add by 10 minutes until extended to 50
minutes and return to 0.
clock will add by 10 minutes until extended to 50
minutes and return to 0.
3. Once time is set do not press the TIME ON button.
To set specific TIME OFF
1. Press the TIME OFF button once
2. Select the desired hour and minutes you want the unit
1. Press the TIME OFF button once
2. Select the desired hour and minutes you want the unit
to turn off again.
-To set the hours, press the HR button once, advancing
the timer 1 hour, continue to press this button, the clock
will add by 1 hour until extended to 11 hours, then will
change to PM or AM and return to 0 (12:00). When the
timer advances to 11, the next press will return the timer
to either 12:00 am or pm.
will add by 1 hour until extended to 11 hours, then will
change to PM or AM and return to 0 (12:00). When the
timer advances to 11, the next press will return the timer
to either 12:00 am or pm.
-To set the minutes, press MIN button once, the clock will
add by 10 minutes, continue to press this button. The
clock will add by 10 minutes until extended to 50
minutes and return to 0.
clock will add by 10 minutes until extended to 50
minutes and return to 0.
3.Once time is set do not press the TIME OFF button.
Remote control real time clock instructions
-Open the battery cover of the remote control and press
the Clock Set button with a pencil or pen.
-Open the battery cover of the remote control and press
the Clock Set button with a pencil or pen.
-Press the HR. button and MIN button and adjust the cor-
rect time.
-Press the Clock Set button again and close the battery
cover.
-The display will show the correct time
rect time.
-Press the Clock Set button again and close the battery
cover.
-The display will show the correct time
Clock Time settings: HR and MIN
To set the hours, press HR button once, the time will add 1
hour, continue to press this button, the clock will add by
To set the hours, press HR button once, the time will add 1
hour, continue to press this button, the clock will add by
1
hour until extended to 11 hours, then will change to PM or
AM and return to 0 (12:00).
AM and return to 0 (12:00).
To set the minutes, press MIN button once, the clock will
add 1 minute, continue to press this button and the clock
will add by 1 minute until extended to 59 minutes, then
return to 00.
add 1 minute, continue to press this button and the clock
will add by 1 minute until extended to 59 minutes, then
return to 00.
TO RESET ALL FUNCTIONS ON THE REMOTE
CONTROL PRESS THE RESET BUTTON WITH
A PENCIL OR PEN.
CONTROL PRESS THE RESET BUTTON WITH
A PENCIL OR PEN.
Clock set button
Reset button
Back of remote