Sunfire OLE-2SF Manual De Usuario

IR

Symptom

Cause

Solution

No control

of IR

sources.

1. Programming:

missing or incorrect

IR commands.

Verify and correct program-

ming. Test IR commands from

SunTools.

. Wiring: Incorrect

wiring between Zone

and ‘Head-End”.

Verify and correct wiring.

3. Wiring: IR emitter

connected to wrong

source IR port of

multi-room controller.

Verify port connection and

correct.

IR emitter defective.

Replace IR emitter.

Intermit-

tent source

control.

IR flooding.

Check to see if any ambi-

ent light is shining on built in

IR receiver or in direct line

with plasma TV noise. If the

Olé-SF cannot be relocated,

disable the IR receiver in

SunTools setup software and

use a plasma friendly external

receiver as shown on page 14

of this manual. If installed in

conjunction with an 3rd-party

multi-room controller, please

refer to its own troubleshooting

steps.