Sonoro SO-110 Manual De Usuario
2.
Pair your mobile phone or Bluetooth device to
the sonoroRADIO via Bluetooth.
the sonoroRADIO via Bluetooth.
i
Enter code ‘0000’ .
ð After pairing, the display permanently shows
the [Bluetooth] text.
Deleting connected devices
3.
3.
Press the [Memory 1] button on the top of the
device or the remote control and hold for
approx. 3 seconds.
device or the remote control and hold for
approx. 3 seconds.
ð The display shows [Unpaired] for 2 seconds.
12.2
Playing music via Bluetooth
Starting playback
1.
1.
Press the click wheel or the [Play/Pause] button
on the sonoroRADIO remote control to start
playback.
on the sonoroRADIO remote control to start
playback.
Pausing playback
2.
2.
Press the click wheel or the [Play/Pause] button
on the sonoroRADIO remote control again to
pause playback.
on the sonoroRADIO remote control again to
pause playback.
i
The buttons on the sonoroRADIO offer only limited
control over external devices.
control over external devices.
13
AUX playback
The AUX input can be used to connect and play back
from other audio devices.
from other audio devices.
Fig. 42: Activating AUX playback
1.
1.
Switch on the sonoroRADIO.
2.
Connect the external audio device to the AUX
input on the sonoroRADIO.
input on the sonoroRADIO.
3.
Press the [MODE] button until the display shows
[AUX. Input]. You can also press the [AUX]
button on the remote control.
[AUX. Input]. You can also press the [AUX]
button on the remote control.
ð The display shows [AUX] (Fig. 42).
4.
Turn on the external device and start playback
on the external device.
on the external device.
14
USB playback
You can connect additional devices and play music
through the USB playback port on the back of the
sonoroRADIO.
through the USB playback port on the back of the
sonoroRADIO.
i
The MP3 format "MPEG 1 layer 3 with sample
rates of 44.1kHz and 22.05 kHz” can be played
back.
rates of 44.1kHz and 22.05 kHz” can be played
back.
Fig. 43: Setting USB playback
1.
1.
Switch on the sonoroRADIO.
2.
Press the [MODE] button until the display shows
[USB] mode, or press the [USB] button on the
remote control.
[USB] mode, or press the [USB] button on the
remote control.
ð The display shows the [USB] symbol (Fig. 43).
3.
Connect an external USB device to the sonoroR-
ADIO.
ADIO.
ð The display shows [Reading…].
4.
Press the [Play/Pause] button to commence
playback.
playback.
i
By pressing the [USB] button on the remote
control, you can edit the ID3 metadata, if
available. The sequence for this is:
‘Track è Artist è Album è Elapsed time’
control, you can edit the ID3 metadata, if
available. The sequence for this is:
‘Track è Artist è Album è Elapsed time’
Stopping USB playback
5.
5.
Press the click wheel or the [Play/Pause] button
on the remote control to pause playback.
on the remote control to pause playback.
15
Relax Music playback
Fig. 44: Setting Relax Music
1.
1.
Switch on the sonoroRADIO.
© 2013
61