Sony Music Entertainment Video Games DXF-C50WA Manual De Usuario

Using the Focus Assist Function

34

The edges of the object that coincides with the color 
detected in step 4 are sharpened within the area 
selected in step 3.
Turn the control clockwise to make the edges 
sharper.

Press the ASSIGN. switch that is assigned the 
PEAKING PLUS function to switch to the STD 
(standard) mode.

You can also set to this mode using “PEAKING 
MODE” from the PEAKING menu (see page 39).

Adjust the amount of correction with the PEAKING 
control.

Turn the control clockwise to make the edges 
sharper.

This function enables you to display both images for 
picture composition and for focusing at the same time.

Press the ASSIGN. switch that is assigned the 
MAGNIFICATION function.

The image is magnified.
You can also set to this mode from the 
MAGNIFICATION menu (see page 40).

Press and hold the ASSIGN. switch that is assigned 
the MAGNIFICATION function.

The magnified area changes in the following 
sequence.
You can also select an area under “MAG 
POSITION” of the MAGNIFICATION menu (see 
page 40).

If the “MAG POSITION” setting is changed, the 
“POSITION” setting on the PEAKING menu will be 
changed too.

Select one of the display modes (MODE1 to 
MODE3) under “MODE SEL” of the 
MAGNIFICATION menu.

MODE1: Standard magnified display

MODE2: Displays the original image at the bottom 
right corner of the magnified image

MODE3: Displays the magnified image at the center 
of the original image

The two manners of returning to the normal display, 
under “AUTO RELEASE” settings in the 
MAGNIFICATION menu, are as follows.
“AUTO”: Returns to the normal display automatically 

about five seconds after magnifying the image using 
the ASSIGN. switch.

“MAN”: Press the ASSIGN. switch again to return to the 

normal display.

 

CNT

UPPER

LOWER

RIGHT

LEFT