Sony TAV-L1 Manual De Usuario

 US

This system contains a strong magnet in the speaker unit that 
generates a magnetic field. Keep any items susceptible to 
magnetic fields away from the speaker.

If a snapping or popping sound from 
the system is continuous or frequent 
while the system is operating, unplug 
the system and consult your dealer or 
service technician. It is normal for 
system’s to make occasional 
snapping or popping sounds, 
particularly when being turned on or 
off.

Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat the batteries.

Danger of explosion if battery is incorrectly replaced. 
Replace only with the same or equivalent type.

To preserve our environment, dispose of used batteries 
according to your local laws or regulations.

• The lift unit moves up and down 

automatically when the system is 
turned on/off, and when the input is 
switched with “AUTO” selected in 
“LIFT MODE” (page 69). You can 
also make the lift unit move up/down 
by pressing 

.

• To prevent operational mistakes, this 

system features a “LOCK” function 
(page 69).

• When connecting other components to the side of the 

system (e.g., VIDEO 2 connections), make sure not to 
place any cords under the lift unit to avoid trapping them 
as the lift unit moves.

• Do not touch the lift unit (especially the circled areas in 

the right illustration) while it is moving. Especially, watch 
out for small children.

• Do not operate this system while the lift unit is moving.

Do not place this system in a 
place where medical equipment is 
in use. It may cause malfunction 
of medical instruments.

• Before relocating the system, 

perform the procedure in “On 
moving the system” (page 12), then 
disconnect all the cables from the 
system.

• When you carry the system by hand, hold the system as 

illustrated on the right. If you do not do so, the system may 
fall and be damaged or cause serious injury. If the system 
has been dropped or damaged, have it checked 
immediately by qualified service personnel.
As the glass surface of the system has a special coating, be 
careful to avoid touching the glass surface as much as 
possible.

• When transporting it, do not subject the system to jolts or 

excessive vibration. The system may fall and be damaged 
or cause serious injury.

• When you carry the system in for repair or when you move 

it, pack it using the original carton and packing material.

• Carrying the system requires two or more people.

• Never cover the ventilation holes 

in the cabinet. It may cause 
overheating and result in fire.

• Unless proper ventilation is 

provided, the system may gather 
dust and get dirty. For proper 
ventilation, observe the 
following:
– Do not install the system turned backwards or 

sideways. 

– Do not install the system turned over or upside down. 
– Do not install the system on a shelf or in a closet. 
– Do not place the system on a rug or bed. 
– Do not cover the system with cloth, such as curtains, or 

items such as newspapers, etc.

• Never install the system as follows:

• Do not insert anything in the ventilation 

holes, gaps between the screen and the lift 
unit or the disc slot. If metal or liquid is 
inserted in these holes, it may result in fire 
or electric shock.

• If anything falls into the cabinet, unplug 

the unit and have it checked by qualified 
personnel before operating it any further.

• Do not block the ventilation slots by putting anything on 

the system. The system is equipped with a high power 
amplifier. If the ventilation slots are blocked, the unit can 
overheat and malfunction.

Air circulation is 
blocked.

Air circulation is 
blocked.

Wall

Wall