Harbor Freight Tools 3 CFM Two Stage Vacuum Pump Manual Del Producto
Page 3
For technical questions, please call 1-800-444-3353.
Item 61176
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Electrical safety
1.
power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs
with grounded power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
2.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
3.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
4.
When operating a power tool outdoors,
use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
5.
If operating a power tool in a damp
location is unavoidable, use a Ground
Fault circuit Interrupter (GFcI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
personal safety
1.
Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may
result in serious personal injury.
2.
Use personal protective equipment.
Always wear eye protection.
Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or
hearing protection used for appropriate
conditions will reduce personal injuries.
3.
Only use safety equipment
that has been approved by an
appropriate standards agency.
Unapproved safety equipment may
not provide adequate protection.
Eye protection must be ANSI-approved
and breathing protection must be
NIOSH-approved for the specific
hazards in the work area.
power tool use and care
1.
Use the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
2.
Do not use the power tool if the Switch
does not turn it on and off.
Any power tool that cannot be
controlled with the Switch is
dangerous and must be repaired.
3.
Disconnect the plug from the power
source before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4.
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power tool
or these instructions to operate the
power tool. Power tools are dangerous
in the hands of untrained users.