Chaparral FS2620R Manual De Usuario
Changing Router Configuration
3-15
5
Select the Topology that matches your configuration and press Enter:
– LOOP—use this option for all configurations except when the channel is
connected to a switch F-port. See
.
– POINT-TO-POINT—use this option only when you connect the channel to a
switch F-port. See
– AUTO—Automatically detects the configuration based on loop initialization
process or port address of switch or fabric. Use this option when you do not know
what topology you are using or when you plan to change the configuration as you
might during testing of the router.
what topology you are using or when you plan to change the configuration as you
might during testing of the router.
The Link Speed screen displays with the current setting marked with an *.
6
Select the speed you want and press Enter.
You can set the speed to: 1GB, 2 GB, or AUTO. AUTO attempts to determine the
speed of the link/loop and configures the FC chip appropriately.
speed of the link/loop and configures the FC chip appropriately.
If you selected Loop as the topology, the Loop ID screen displays showing the
current setting.
current setting.