Chaparral FS2620R Manual De Usuario

Select Mapping Mode press Enter.

The Mapping Mode screen displays. The current setting is marked with an * next to 
it.

Select the option you want and press Enter:

AUTO—lets the router assign the FC LUN to each device anytime you power up the 
router.

FIXED—tells the router to keep the same FC LUN as currently assigned for each 
device. This reserves the same FC LUN for each device, even when you power down 
and power up the router. The router retains the FC LUN, even if the device is no 
longer connected. 

If FIXED mode, the controller auto maps new devices.

The system confirms that the changes are made. 

Press Enter to return to the Address Mapping screen.

You can change the FC LUN for any device connected to the router. You can manually 
change the FC LUNs when the address mapping mode is set to FIXED. As long as you 
stay in FIXED mode, all FC LUNs you change will be retained even if the device or router 
is powered off and back on or if the device is removed and reconnected.

You can set the FC LUN for devices to any number between 00 and 63 by selecting the FC 
LUN that you want the device to map to. You cannot select the same FC LUN as the 
router’s LUN.

When in FIXED mode, the router will discover any new devices or existing devices that 
were removed and reconnected to a different location. These newly discovered devices 
will be in AUTO mode and will be assigned an FC LUN by the router. You can change 
these FC LUNs by following the steps below. 

Note: New devices that are added when in FIXED mode are mapped 
automatically.