Central Pneumatic Power Screwdriver 95173 Manual De Usuario

SKU 95173  

PAGE 2

Rivet Capacity (Pin Diameter)

3/32”, 1/8”, 5/32”, 3/16”

Operating Air Pressure

85 to 90 PSI

Air Consumption

4.5 SCFM @ 90 PSI

Air Inlet Size

1/4”-18 NPT

Overall Dimensions

11” High x 10-1/8” Long x 4” Wide

Weight

~3 Pounds

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Keep this manual and invoice in a safe and dry place for future reference.

When unpacking, check to make sure that all the parts and accessories 

page 10 are included, and the product is intact and undamaged.  If any parts are miss-
ing or broken, please call Harbor Freight Tools at the number shown on the cover of this 
manual as soon as possible.

wARnIng!  Use eye and hearing protection.  Always wear ANSI-ap-

proved safety impact goggles and hearing protection when using this 
Riveter.  Other people in the work area must also wear appropriate ANSI-
approved safety equipment.

Keep work area clean.  Cluttered areas invite accidents.

wARnIng!  Keep all body parts clear of the Rivets while the Riveter is connected 
to the air hose.

stay within air pressure capacity.  Never operate the Riveter above 90 PSI.

Observe work area conditions.  Keep work area well lit.

Keep children away.  Children must never be allowed in the work area.  Do not let 
them handle machines, tools, extension cords, or air hoses.

store idle equipment.  When not in use, tools must be stored in a dry location to 
inhibit rust.  Always lock up tools and keep out of reach of children.

1.

2.

3.

4.

5.

6.

7.

8.