Central Pneumatic 95211 Manual De Usuario
6.
Maintain tools: Inspect the Mounting Bracket to make sure it has not worked its way
loose. The Auto-Rewind Air Hose Reel could possibly fall and be damaged. Inspect the Air
Hose often and, if damaged, have it replaced or repaired by an authorized repair facility.
loose. The Auto-Rewind Air Hose Reel could possibly fall and be damaged. Inspect the Air
Hose often and, if damaged, have it replaced or repaired by an authorized repair facility.
7.
Do not use this tool if under the influence of Drugs or Alcohol: Read warning labels
on prescriptions to determine if your judgment or reflexes might be impaired while taking
them. If there is any doubt, do not use this tool.
on prescriptions to determine if your judgment or reflexes might be impaired while taking
them. If there is any doubt, do not use this tool.
8.
Stay Alert: Watch what you are doing. This air tool could inject air into and under your
skin. It is important that the operator NOT use it to blow anything off skin, or hands. Wear
heavy-duty gloves when using this tool.
skin. It is important that the operator NOT use it to blow anything off skin, or hands. Wear
heavy-duty gloves when using this tool.
1.
Do not disassemble this Auto-Rewind Air Hose Reel. It includes a large, high tension
spring and could cause injury. It is NOT meant to be taken apart.
spring and could cause injury. It is NOT meant to be taken apart.
2.
When mounting, (mounting hardware not included), the Bracket that holds the Auto-
Rewind Air Hose Reel, use extreme caution to prevent drilling into electrical wires and/or
cables.
Rewind Air Hose Reel, use extreme caution to prevent drilling into electrical wires and/or
cables.
3.
When attaching Mounting Bracket (34), to the Auto-Rewind Air Hose Reel, be careful not
to over tighten the Bracket Attach Bolts (30).
to over tighten the Bracket Attach Bolts (30).
4.
Do not let go of the hose during use. While operating, keep bystanders and children away.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors that cannot be built into this
product but must be supplied by the operator.
cannot cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors that cannot be built into this
product but must be supplied by the operator.
When unpacking, check to make sure all parts listed on page 4 of this manual are included. If any
parts are missing or broken, please call Harbor Freight Tools® as soon as possible.
parts are missing or broken, please call Harbor Freight Tools® as soon as possible.
Place the Mounting Bracket on the wall, or stud where you want to install it. Use a number 2 pencil
(not included) to mark the holes for drilling. Drill two holes, being careful not to drill into wires and/or
cables. Be sure to know the location of all electrical wiring in the immediate area.
(The Mounting bracket hardware is not included with this tool.)
(not included) to mark the holes for drilling. Drill two holes, being careful not to drill into wires and/or
cables. Be sure to know the location of all electrical wiring in the immediate area.
(The Mounting bracket hardware is not included with this tool.)
SKU 95211
Page 3
For technical questions, please call 1-800-444-3353.
SPECIFIC SAFETY WARNINGS
UNPACKING
INSTALLING THE MOUNTING BRACKET