Chamberlain PILCEV Remote Lamp Control Prospecto
REMOTE LAMP CONTROL
MODELS
PILCEV &
PILCEVC
The Remote Lamp Control module offers a quick and convenient way
to control the lights in your home. The module can be programmed
to a remote control or a garage door opener. The module is
compatible with up to 8 MyQ™ enabled remote controls OR a
combination of up to 8 MyQ™ enabled garage door openers. This
product is NOT to be used for appliances.
to control the lights in your home. The module can be programmed
to a remote control or a garage door opener. The module is
compatible with up to 8 MyQ™ enabled remote controls OR a
combination of up to 8 MyQ™ enabled garage door openers. This
product is NOT to be used for appliances.
SPECIFICATIONS
Fluorescent .........................................................................600W / 5A
Tungsten .............................................................................600W / 5A
LED .....................................................................................600W / 5A
Electronic Ballast (Fluorescent) ................................... 599W / 4.99A
Fluorescent .........................................................................600W / 5A
Tungsten .............................................................................600W / 5A
LED .....................................................................................600W / 5A
Electronic Ballast (Fluorescent) ................................... 599W / 4.99A
Re-lamp with listed SBCFL only, 599W total, maximum
MODES OF OPERATION
INSTALLATION & PROGRAMMING
To prevent possible SERIOUS INJURY or
DEATH from electrocution or fi re, the light
control is ONLY for indoor use.
DEATH from electrocution or fi re, the light
control is ONLY for indoor use.
NOTICE: To comply with FCC and/or Industry Canada (IC)
rules. adjustment or modifications of this transceiver are
prohibited. THERE ARE NO USER SERVICEABLE PARTS.
rules. adjustment or modifications of this transceiver are
prohibited. THERE ARE NO USER SERVICEABLE PARTS.
This device complies with Part 15 of the FCC rules and IC
RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
REMOTE CONTROL OPERATION:
Allows you to activate the
module from a remote control.
Allows you to activate the
module from a remote control.
OVERVIEW
1-800-528-9131
www.chamberlain.com
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first retail purchaser of this
product that is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.
product that is free from defect in materials and/or workmanship for a
period of 1 year from the date of purchase.
TO ERASE ALL PROGRAMMING
Press and hold the Learn button on the module for 6 seconds. All
programming is now erased.
programming is now erased.
The module can be programmed to a MyQ™ enabled remote control or a MyQ™ enabled garage door opener.
GARAGE DOOR OPENER OPERATION:
Allows you to synchronize the module with your
garage door opener light bulbs. Example: The garage
door opener light bulbs are set to automatically turn
off after 4 ½ minutes, the module will also turn off
after 4 ½ minutes.
Allows you to synchronize the module with your
garage door opener light bulbs. Example: The garage
door opener light bulbs are set to automatically turn
off after 4 ½ minutes, the module will also turn off
after 4 ½ minutes.
1
Plug the lamp into the module and plug the
module into an electrical outlet (the LED on
the module will flash). NOTE: Make sure
the lamp is switched ON.
module into an electrical outlet (the LED on
the module will flash). NOTE: Make sure
the lamp is switched ON.
2
If the lamp is not ON, press and release
the Power button on the module to turn
the lamp ON.
the Power button on the module to turn
the lamp ON.
3
Press and release the Learn button on
the module (the LED on the module
will light).
the module (the LED on the module
will light).
4
The lamp’s light bulb will blink and the LED on the module will
turn OFF when the device has been programmed.
turn OFF when the device has been programmed.
Power Button
Lamp
Outlet
Outlet
LED
Learn
Button
Button
Press the button on
the remote control.
the remote control.
Press the Learn button on
the garage door opener.
the garage door opener.
OR