Celestron VistaPix 72212 Manual De Usuario

P.7

Resolution Adjustment
Select "Resolution" and press OK Button.      Choose the desired resolution 
and press OK button      to change the image resolution.    Indicates 0.3MP,
        indicates 2.0MP, and          indicates 3.0MP on the LCD screen.

Exposure Value
Select "Exposure value" and press the OK button.      This allows you to change 
the exposure setting suggested by the camera. Press the Up or Down button 
to select a value between -1.5 and 1.5 and press OK button      to accept the
exposure value. Negative exposure values tend to underexpose (darken) your 
object while positive values will overexpose (brighten) the object.

Setup the Date
Select "Date / Time" and press the OK button      to set the internal clock. Edit 
the correct date (y/m/d) and time (h/m/s) by pressing the Up-down button.
Press the OK button     again to complete the setting.

P.10

5. How to use the binocular

Focusing the Binocular

Adjusting the eyepieces

The distance between your eyes is called interpupillary distance.
The interpupillary distance is different from one person to another.
It is important to adjust your interpupillary distance before using the VistaPix:
- Hold VistaPix firmly in the normal viewing position.
- Adjust the barrels by pushing together or pulling apart until you see a single 
  circular image with both of your eyes.

To adjust the eye-relief for eyeglass wearers: Fold down the rubber eyecups 
and place them against your glasses to get the best viewing result.

A. Set the Diopter Knob on underside of VistaPix to its center point between 
      - and + . 
B. Choose an object that is at least 15 meters (49 ft) away.
C. Looking with just your left eye, rotate the Center Focus Knob(2) until the object 
     you are viewing is in best focus.
D. Looking with just your right eye, rotate the Diopter Knob(1) until the object you 
     are viewing is in best focus.
E. Viewing your object with both eyes, turn the Center Focus Knob to bring it in 
     best focus.

TV-out Display Mode
Select "TV out" and press OK button.      Choose the corresponding output 
(NTSC for United States or PAL for Europe)  and press OK button      to
complete setting.