CBC ZC-PT223 Manual De Usuario

 

       

 

 

 

 

                         

User’s Manual

 

 

 

33 

 

 

•  HOME FUNCTION 

This option is used to enable or disable the HOME function. Use the left/right 
direction keys on the control keyboard to change the setting.

 

 

•  SELECT MODE 

Select a mode that you want the PTZ camera to execute when the HOME 
function is enabled and the RETURN TIME has expired. The options are 
<AUTOPAN>, <SEQUENCE>, <CRUISE> and <PRESET>. Use the right 
direction key on the control keyboard to change the setting and the following 
items will change to correspond to your selection.

 

 

•  PRESET 

Select a preset point for the PTZ camera to move to when an alarm pin is 
triggered. 
 

Select a sequence line for the PTZ camera to execute when an alarm pin is 
triggered. The sequence line should have previously been defined in the 
SEQUENCE setup menu.

 

 

Select an auto-pan line for the PTZ camera to execute when an alarm pin is 
triggered. The auto-pan line can be defined in the AUTOPAN setup menu.

 

Select a cruise line for the PTZ camera to execute when an alarm pin is 
triggered. The cruise line can be defined in the CRUISE setup menu.

 

•  RETURN TIME 

The PTZ camera starts to count down the RETURN TIME when the PTZ 
camera is idle, and will execute the function set under SELECT MODE if the 
return time expires. The RETURN TIME range is from 1 to 128 minutes.

 

 

•  GO 

If the HOME function is enabled, the user can also execute the HOME 
function manually by selecting this option. 

HOME SETTING 

HOME FUNCTION 

 

OFF 

SELECT 

MODE 

  PRESET

PRESET 

POINT 

  001 

RETURN 

TIME 

  001 

GO   

 

 

 

ENTER

EXIT 

    YES