Yamaha DRX-1 Manual De Propietario

49

Your DVD Recorder remote control has limited control of 
TVs of different brands. 
The following buttons will operate TVs:

- VOL + 

increase TV  volume

- VOL - 

decrease TV  volume

- MUTE  mute TV  sound

Other buttons normally operate the DVD Recorder but 
will operate the TV if you press and hold TV SHIFT.

- CH + 

next higher TV channel 

- CH -  

next lower TV channel 

- 0 - 9 

choose TV channel directly

- POWER (B/I) 

switch TV to standby or power off or on

If your TV does not respond to the Recorder’s remote 
control, reprogram your remote control. Below are the 
remote control codes for various TV brands. Follow these 
steps to reprogram the remote control.

1 Look up the setup code for your TV in the code list in 

the following pages.

2 Pointing the remote control at the TV, press and hold 

t and u (left and right cursor) simultaneously for at 
least three seconds.

3 Release both buttons.
4 Within 30 seconds, enter the correct four digit code 

by using the digit buttons 0-9.

5 See if the remote works as described at left. If the 

remote does not work your TV, try other codes for 
your brand. If the brand of your TV is not in the list, 
try the codes for other brands one after the other or 
follow the alternative process as described below.