ZyXEL Communications Barcode Reader UNS Series Manual De Usuario

 Chapter 15 Network Setting

UNS Series User’s Guide

Figure 36   Configuration > Network Configuration > Network Setting > Edit > IPv4

The following table describes the items on this screen. 

Click Configuration > Network Configuration > Network Setting > Edit > IPv6 to display the 
following screen. 

Table 24   Configuration > Network Configuration > Network Setting > Edit > IPv4

IPV4 Setting

Name

Display the name of a network interface. 

DHCP

By default, DHCP is selected. 

BOOTP

Select BOOTP radio button to acquire an IP address automatically.

Static 

Select Static radio button to specify an IP address manually.

Address

Enter the new IP address for the network setting.

Mask

Enter the new mask address for the network setting.

Gateway

Enter the new gateway address for the network setting.

Back 

Click Back to go to the previous screen. 

Apply 

Click Apply to save the changes.

Reset

Click Reset to change the screen to the default settings.