VIZIO VBR334 Manual De Usuario
4
31
VBR334
2. Use the
Arrow and SELECT buttons
to select the setting you wish to restore
to the factory default:
• Restore factory settings and deactivate all connected
to the factory default:
• Restore factory settings and deactivate all connected
applications - Restore the player and all of its Internet Apps to their
factory settings.
factory settings.
• Restore factory settings - Restore the player to its factory settings,
but retain Internet App settings.
• Deactivate all connected applications - Restore all Internet Apps to
their factory settings and remove all account information.
• Deactivate Netflix/Pandora/Vudu - Remove all account information
and restore to factory settings.
Adjusting the Network Settings
In order to access BD-Live or Internet Apps, your player must be connected to
your home network and to the internet.
your home network and to the internet.
To access the Network menu:
1. Turn on the player and your TV. Use
the
Arrow buttons on the remote to
highlight
Settings and press SELECT.
The Settings menu is displayed.
2. Use the
Arrow buttons on the remote
to highlight
Network and press
SELECT.
The Network drop-down menu is
displayed.
The Network drop-down menu is
displayed.
Adjusting the Wired Settings
If your player is connected to your home network with an ethernet cable, the
player will automatically detect the connection. You can manually adjust the
settings, but VIZIO recommends this for advanced users only.
If your player is connected to your home network with an ethernet cable, the
player will automatically detect the connection. You can manually adjust the
settings, but VIZIO recommends this for advanced users only.
To adjust the wired settings:
1. From the Network Menu, use the
Arrow buttons on the remote to
highlight Wired and press
highlight Wired and press
SELECT.
The Wired menu is displayed.
2. Use the
Arrow buttons on the remote
to highlight
IP Mode and press
SELECT.
Use the
Use the
Arrow buttons to select
Off, Dynamic, or Manual and press
SELECT.
SELECT.
To change the individual IP settings, IP Mode must be set to
Manual.
3. Use the Arrow and SELECT buttons on
the remote to change each of the IP
Mode settings:
• IP Address
• Subnet Mask
• Gateway
• Primary DNS
• Secondary DNS
Mode settings:
• IP Address
• Subnet Mask
• Gateway
• Primary DNS
• Secondary DNS
If you are unsure what values to enter, contact your Internet Service
Provider (ISP) for assistance.
Provider (ISP) for assistance.
4. When you are finished, highlight
Apply and press SELECT.