Visioneer MX 230 Manual De Usuario
2
V
ISIONEER
MX 230 D
IGITAL
C
AMERA
U
SER
’
S
G
UIDE
S
AFETY
I
NFORMATION
■
Do not look at the sun through the viewfinder. Viewing the
sun or other strong light source through the viewfinder could
cause permanent visual impairment.
sun or other strong light source through the viewfinder could
cause permanent visual impairment.
■
Do not disassemble the camera. Touching the camera’s
internal parts could result in injury. In the event of malfunction,
only a qualified technician should repair your camera. Should
the camera break as a result of a fall or other accident, take it to
an authorized service center.
internal parts could result in injury. In the event of malfunction,
only a qualified technician should repair your camera. Should
the camera break as a result of a fall or other accident, take it to
an authorized service center.
■
Avoid contact with the liquid crystal. Should the liquid crystal
display (LCD) break, care should be taken to avoid injury due
to broken glass and to prevent the liquid crystal from touching
the skin or entering the eyes or mouth.
display (LCD) break, care should be taken to avoid injury due
to broken glass and to prevent the liquid crystal from touching
the skin or entering the eyes or mouth.
■
Do not use the camera in the presence of flammable gas.
Using electronic equipment near flammable gas could result in
explosion or fire.
Using electronic equipment near flammable gas could result in
explosion or fire.
■
Observe proper precautions when handling batteries. Use
only size AA alkaline or NiMH batteries. Batteries my leak or
explode if handled improperly. Remove the batteries (and the
memory card) from the camera if you are going to store the
camera for an extended period of time. Ensure the camera is
turned off before inserting or removing batteries. Do not insert
batteries backwards or upside down. Do not disassemble
batteries or expose them to flame or excessive heat. Do not
only size AA alkaline or NiMH batteries. Batteries my leak or
explode if handled improperly. Remove the batteries (and the
memory card) from the camera if you are going to store the
camera for an extended period of time. Ensure the camera is
turned off before inserting or removing batteries. Do not insert
batteries backwards or upside down. Do not disassemble
batteries or expose them to flame or excessive heat. Do not