Vauxhall Combo Manual De Propietario
79
Safety systems
Picture no: 11595s.tif
Using the belts
Fitting seat belts
Pull the belt out of the retractor and guide
it across the body, making certain that it is
not twisted.
Insert latch plate into buckle. Backrest
Insert latch plate into buckle. Backrest
must not be tilted too far back as this
would affect the operation of the seat
belts; recommended maximum tilting
angle approx. 25°. The lap belt must be
straight and lie snugly against the body.
Tighten lap belt at frequent intervals whilst
driving by tugging diagonal part of belt.
Picture no: 11596s.tif
Bulky clothing prevents the belt from fitting
properly. The belt must not rest against
hard or fragile objects in the pockets of
your clothing (e.g. ballpoint pens, keys,
spectacles) because these could cause
injury. Do not place any objects (e.g.
handbags, mobile phones) between the
belt and your body.
Picture no: 11597s.tif
Height adjustment
of front seat belt upper anchorage points:
1. Pull belt out slightly.
2. Press belt guide - or - push button down.
3. Set desired height.
4. Allow to lock audibly into position.
Do not adjust height whilst driving.
1. Pull belt out slightly.
2. Press belt guide - or - push button down.
3. Set desired height.
4. Allow to lock audibly into position.
Do not adjust height whilst driving.
9
Warning
On pregnant women in particular, the lap
belt must be positioned as low as
possible across the pelvis so as not to put
too much pressure on the abdomen.