Unisar Digital Thermometer Manual De Usuario

6

7

1. Turn on the baby’s thermometer by pressing 

the power button for approximately 2 sec-
onds.  The LCD display will show the 
temperature data.

3. Turn on the Parents’ Unit by pressing the 

power button for approximately 2 seconds.  
The LCD display will show it is searching for 
the signal from the thermometer.  After      
several seconds the LCD display will show     
the temperature reading received from the 
thermometer.

4. To switch between Celsius and Fahrenheit, press 

the (S) button for approximately 2 seconds.  Both 
units have to be independently set.

An alarm for

abnormal temperatures

Alarm

A. Push 2 seconds to

switch between

°C & °F.

B. Choose high

temperature (fever

warning

temperature point

Temporarily cancels buzzer sound

A. Push 2 seconds to turn power on or off

B. Push to set the fever alarm temperature

Push 2 seconds to

switch between

°C & °F

Push 2 seconds to turn

power on or off

2. Clip the thermometer to the 

baby’s diaper, pajamas, or    
our special belt, approxi-
mately one inch (2-3 cen-
timeters) to the left of the
belly button.  If you are using
the belt provided, it’s best to 
fasten it over the diaper or 
pajamas to avoid any 
possible irritation.  Make 
sure the temperature sensor 
on the back of the unit is in 

contact with the skin and that  

your baby is wearing clothing 
covering the stomach to avoid the loss of
body heat.