Sony VGP-MR200U/E Manual De Usuario
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
Setup
27
Case 3: Network connector of computer is free (system environments E, F)
Note
When connecting the Network Media Receiver and the computer as shown above, the following settings
must be configured:
• Assign a fixed IP address to the computer (this page).
• Select an IP address allocation method for the Network Media Receiver (page 33).
must be configured:
• Assign a fixed IP address to the computer (this page).
• Select an IP address allocation method for the Network Media Receiver (page 33).
Assigning a fixed IP address to the computer
When the Network Media Receiver is connected through a network cable in one of the system
environments listed below, a fixed IP address must be assigned to the computer.
• E, F (page 24)
• G (page 24) without router with built-in hub
environments listed below, a fixed IP address must be assigned to the computer.
• E, F (page 24)
• G (page 24) without router with built-in hub
Note
Do not use this system configuration if the system environment includes a router (or a router with built-in
hub).
hub).
1
On the computer, click “Start” on the Windows taskbar, and click “My
Computer” to display the “My Computer” window.
Computer” to display the “My Computer” window.
2
Click “More” and “My Network Places”.
The “My Network Places” window appears.
3
Click “Show Network Connections”.
The “Network Connections” window appears.
4
Right-click “Local Area Connection”, and click “Properties”.
The “Local Area Connection Properties” window appears.
To NETWORK
connector
connector
Computer
To NETWORK
connector
connector
Network Media Receiver
Crossover cable (supplied)