Smithco Lawn Sweeper 48-000-C Manual De Usuario
10
Ser
vice
vice
OPERATION
Beater reel MUST BE DISENGAGED before starting engine.
ACCELERATOR/REVERSE PEDAL
On the right floorboard is a "rocker" pedal. Push down on the front (G) with your
foot and the machine will accelerate. Push down on the rear of the pedal (H) with
the heel of your foot and the machine will go in reverse. The machine is in neutral
when foot is off the pedal.
foot and the machine will accelerate. Push down on the rear of the pedal (H) with
the heel of your foot and the machine will go in reverse. The machine is in neutral
when foot is off the pedal.
DAILY CHECKLIST
1. Check park brake adjustment. Adjust as required.
2. Check engine oil level. Add as needed. DO NOT OVERFILL.
3. Tire pressure should be 20 psi (1.4 bar) on all Sweep Star 48 tires and
castor wheels. Tire pressure should be 20 psi (1.4 bar) on Sweep Star 60
front tire and castor wheel, 18 psi (1.3 bar) on rear tires.
front tire and castor wheel, 18 psi (1.3 bar) on rear tires.
4. Inspect electrical system for loose connections or frayed wiring, including
battery cables. Replace any faulty equipment or tighten if loose.
5. Check hardware for loose or missing nuts, bolts, screws, etc., and tighten
or replace as needed.
6. Inspect hydraulic lines for damage or leaks. Never use hands to inspect
leaks.
7. Check hydraulic oil level in right side tank. The level should be 2" to 2
1
/
2
"
(5-6.4 cm) from top of tank when fluid is cold. If level is low, add SAE 10W-
40 API Service SJ or higher motor oil.
40 API Service SJ or higher motor oil.
8. Inspect steering, throttle and shift linkages for good hookups and clear
travel.
9. Check controls for smooth, proper working operation. Lubricate as needed.
10. Check and clean all debris from engine compartment.