Solid State Logic 4.3 Manual De Usuario

 
 
 
 

Page 44 of 59 

 

 

Mixer example: the default 64 Ch Mixer 

 
This is the default configuration loaded when you start the software for the first time. It allows 
audio data received at any AES/EBU or ADAT (depending on model), or Analogue input of the 
XLogic Alpha-Link to be routed through the Mixer (i.e., each successive pair of physical inputs of 
the Alpha-Link is connected to at least one of the first 32 stereo mixer columns). This means that 
you will hear something when you install your SSL Soundscape Mixpander in your studio for the 
first time with sound sources connected to any of these inputs. The output signals from these 32 
stereo mixer columns are sent to the “Master L/R” mixer column (column number 33) via BUS 1-2. 
The summed signal from mixer column 33 is then output via the first digital (AES/EBU or ADAT) 
and analogue output pair of the XLogic Alpha-Link. 
 

IMPORTANT: The MADI inputs and outputs are not used in this mixer configuration. 

 

 
First, please note that you can switch the whole SSL Soundscape Mixer window between Small 
Column Size and Full Column Size view by pressing [Q] or [X] respectively, or by clicking Small 
Column Size or Full Column Size under the View menu: