SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario
C
ONFIGURING
THE
S
WITCH
3-152
Command Attributes
•
VLAN – ID of configured VLAN (1-4094).
•
Name – Name of the VLAN (1 to 32 characters).
•
Status – Enables or disables the specified VLAN.
- Enable: VLAN is operational.
- Disable: VLAN is suspended; i.e., does not pass packets.
- Enable: VLAN is operational.
- Disable: VLAN is suspended; i.e., does not pass packets.
•
Port – Port identifier.
•
Membership Type – Select VLAN membership for each interface by
marking the appropriate radio button for a port or trunk:
- Tagged: Interface is a member of the VLAN. All packets
marking the appropriate radio button for a port or trunk:
- Tagged: Interface is a member of the VLAN. All packets
transmitted by the port will be tagged, that is, carry a tag and
therefore carry VLAN or CoS information.
therefore carry VLAN or CoS information.
- Untagged: Interface is a member of the VLAN. All packets
transmitted by the port will be untagged, that is, not carry a tag and
therefore not carry VLAN or CoS information. Note that an
interface must be assigned to at least one group as an untagged port.
therefore not carry VLAN or CoS information. Note that an
interface must be assigned to at least one group as an untagged port.
- Forbidden: Interface is forbidden from automatically joining the
VLAN via GVRP. For more information, see “Automatic VLAN
Registration” on page 3-144.
Registration” on page 3-144.
- None: Interface is not a member of the VLAN. Packets associated
with this VLAN will not be transmitted by the interface.
•
Trunk Member – Indicates if a port is a member of a trunk. To add a
trunk to the selected VLAN, use the last table on the VLAN Static
Table page.
trunk to the selected VLAN, use the last table on the VLAN Static
Table page.