SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario
C
OMMAND
L
INE
I
NTERFACE
4-44
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format:
https://device:port_number
format:
https://device:port_number
Example
Related Commands
Telnet Server Commands
ip telnet port
This command specifies the TCP port number used by the Telnet
interface. Use the no form to use the default port.
interface. Use the no form to use the default port.
Syntax
ip telnet port port-number
no ip telnet port
no ip telnet port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
(Range: 1-65535)
Console(config)#ip http secure-port 1000
Console(config)#
Console(config)#
Table 4-14 Telnet Server Commands
Command
Function
Mode Page
ip telnet port
Specifies the port to be used by the Telnet
interface
interface
GC
ip telnet server Allows the switch to be monitored or configured
from Telnet
GC