SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

4-120

• When you create a new ACL or enter configuration mode for an 

existing ACL, use the permit or deny command to add new rules to 
the bottom of the list. To create an ACL, you must add at least one 
rule to the list.

• To remove a rule, use the no permit or no deny command followed 

by the exact text of a previously configured rule.

• An ACL can contain up to 32 rules.

permit, deny 4-120
ip access-group (4-125)
show ip access-list (4-124)

permit, deny (Standard ACL) 

This command adds a rule to a Standard IP ACL. The rule sets a filter 
condition for packets emanating from the specified source. Use the no 
form to remove a rule.

[no] {permit | deny} {any | source bitmask | host source}

• any – Any source IP address.
• source – Source IP address.
• bitmask – Decimal number representing the address bits to match.
• host – Keyword followed by a specific IP address.

None

Standard ACL

Console(config)#access-list ip standard david
Console(config-std-acl)#