SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

4-170

lacp admin-key (Ethernet Interface)

This command configures a port's LACP administration key. Use the no 
form to restore the default setting.

lacp {actor | partner} admin-key key
[no] lacp {actor | partner} admin-key

• actor - The local side an aggregate link.
• partner - The remote side of an aggregate link.
• key - The port admin key must be set to the same value for ports 

that belong to the same link aggregation group (LAG). 
(Range: 0-65535)

0

Interface Configuration (Ethernet)

• Ports are only allowed to join the same LAG if (1) the LACP system 

priority matches, (2) the LACP port admin key matches, and (3) the 
LACP port channel key matches (if configured).

• If the port channel admin key (lacp admin key - Port Channel) is not 

set when a channel group is formed (i.e., it has the null value of 0), this 
key is set to the same value as the port admin key (lacp admin key - 
Ethernet Interface) used by the interfaces that joined the group.

• Once the remote side of a link has been established, LACP 

operational settings are already in use on that side. Configuring LACP 
settings for the partner only applies to its administrative state, not its 
operational state, and will only take effect the next time an aggregate 
link is established with the partner.

Console(config)#interface ethernet 1/5
Console(config-if)#lacp actor admin-key 120
Console(config-if)#