SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

Descargar
Página de 516
A
DDRESS
 T
ABLE
 C
OMMANDS
4-181
Default Setting 
None
Command Mode 
Privileged Exec
Command Usage 
• The MAC Address Table contains the MAC addresses associated with 
each interface. Note that the Type field may include the following 
types:
- Learned - Dynamic address entries
- Permanent - Static entry
- Delete-on-reset - Static entry to be deleted when system is reset
• The mask should be hexadecimal numbers (representing an equivalent 
bit mask) in the form xx-xx-xx-xx-xx-xx that is applied to the specified 
MAC address. Enter hexadecimal numbers, where an equivalent 
binary bit “0” means to match a bit and “1” means to ignore a bit. For 
example, a mask of 00-00-00-00-00-00 means an exact match, and a 
mask of FF-FF-FF-FF-FF-FF means “any.”
• The maximum number of address entries is 8191.
Example
mac-address-table aging-time
This command sets the aging time for entries in the address table. Use the 
no form to restore the default aging time.
Syntax 
mac-address-table aging-time seconds
no mac-address-table aging-time
seconds - Aging time. (Range: 10-30000 seconds; 0 to disable aging)
Console#show mac-address-table
 Interface Mac Address       Vlan Type
 --------- ----------------- ---- -----------------
  Eth 1/1 00-00-E8-49-5E-DC    1  Delete-on-reset
  Trunk 2 00-E0-29-8F-AA-1B    1  Learned
Console#