SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

4-192

This command configures the priority for the specified interface. Use the 
no form to restore the default.

spanning-tree port-priority priority
no spanning-tree port-priority

 priority - The priority for a port. (Range: 0-240, in steps of 16) 

128

Interface Configuration (Ethernet, Port Channel)

• This command defines the priority for the use of a port in the 

Spanning Tree Algorithm. If the path cost for all ports on a switch are 
the same, the port with the highest priority (that is, lowest value) will 
be configured as an active link in the spanning tree. 

• Where more than one port is assigned the highest priority, the port 

with the lowest numeric identifier will be enabled.

This command specifies an interface as an edge port. Use the no form to 
restore the default.

[no] spanning-tree edge-port

Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree port-priority 128