SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

4-203

Example 
The following shows how to set the configuration mode to port 1, and 
then set the switchport mode to hybrid:

This command configures the acceptable frame types for a port. Use the 
no form to restore the default.

switchport acceptable-frame-types {all | tagged}
no switchport acceptable-frame-types

• all - The port accepts all frames, tagged or untagged. 
• tagged - The port only receives tagged frames. 

All frame types

Interface Configuration (Ethernet, Port Channel)

When set to receive all frame types, any received frames that are 
untagged are assigned to the default VLAN. 

Example 
The following example shows how to restrict the traffic received on port 1 
to tagged frames:

Console(config)#interface ethernet 1/1
Console(config-if)#switchport mode hybrid
Console(config-if)#

Console(config)#interface ethernet 1/1
Console(config-if)#switchport acceptable-frame-types tagged
Console(config-if)#