SMC Networks TIGERSWITCH SMC6752AL2 Manual De Usuario

3-28

You can access the onboard configuration program by attaching a VT100 
compatible device to the switch’s serial console port. Management access 
through the console port is controlled by various parameters, including a 
password, timeouts, and basic communication settings. These parameters 
can be configured via the web or CLI interface.

•

Login Timeout – Sets the interval that the system waits for a user to 
log into the CLI. If a login attempt is not detected within the timeout 
interval, the connection is terminated for the session. 
(Range: 0-300 seconds; Default: 0)

•

Exec Timeout – Sets the interval that the system waits until user input 
is detected. If user input is not detected within the timeout interval, the 
current session is terminated. (Range: 0-65535 seconds; Default: 0)

•

Password Threshold – Sets the password intrusion threshold, which 
limits the number of failed logon attempts. When the logon attempt 
threshold is reached, the system interface becomes silent for a specified 
amount of time (set by the Silent Time parameter) before allowing the 
next logon attempt. (Range: 0-120; Default: 3 attempts)

•

Silent Time – Sets the amount of time the management console is 
inaccessible after the number of unsuccessful logon attempts has been 
exceeded. (Range: 0-65535; Default: 0)

•

Data Bits – Sets the number of data bits per character that are 
interpreted and generated by the console port. If parity is being 
generated, specify 7 data bits per character. If no parity is required, 
specify 8 data bits per character. (Default: 8 bits)

•

Parity – Defines the generation of a parity bit. Communication 
protocols provided by some terminals can require a specific parity bit 
setting. Specify Even, Odd, or None. (Default: None)