Sierra Wireless RAVEN 1X 20070914 Manual De Usuario
Configuration Commands
Rev 3.0B Feb.08
118
•
n=2 : Second IP Manager server.
•
key=128‐bit key in hexadecimal [32 hex characters]
*IPMGRUPDATEn=m
Sets the number of minutes to periodically send an IP update
notification to the corresponding server. This will occur even if
the IP address of the Raven doesnʹt change. *IPMGRUPDATE1
is used to set the refresh rate to *IPMANAGER1, while
*IPMGRUPDATE2 is used with *IPMANAGER2. If the value is
set to 0, then periodic updates will not be issued (i.e. IP change
notifications will only be sent when the IP actually changes).
notification to the corresponding server. This will occur even if
the IP address of the Raven doesnʹt change. *IPMGRUPDATE1
is used to set the refresh rate to *IPMANAGER1, while
*IPMGRUPDATE2 is used with *IPMANAGER2. If the value is
set to 0, then periodic updates will not be issued (i.e. IP change
notifications will only be sent when the IP actually changes).
•
n=1 : First IP Manager server.
•
n=2 : Second IP Manager server.
•
m=0, 5‐255 : Number of minutes to send an update.
*MODEMNAME=name
Name of the Raven (up to 20 characters long) to use when
performing IP address change notifications to IP Manager. The
value in *DOMAIN provides the domain zone to add to this
name.
performing IP address change notifications to IP Manager. The
value in *DOMAIN provides the domain zone to add to this
name.
•
name=modem name (for example, mymodem)
Example: if *MODEMNAME=mymodem and
*DOMAIN=eairlink.com, then the modemʹs fully qualified
domain name is mymodem.eairlink.com.
*DOMAIN=eairlink.com, then the modemʹs fully qualified
domain name is mymodem.eairlink.com.
Automatically Generated Names:
#I3 ‐ The ESN/IMEI will be used as the name.
#CCID ‐ The CCID will be used as the name.
#NETPHONE ‐ The phone number will be used as the name.
Tip: Each modem using IP Manager needs a unique name. Two
modems cannot be called “mymodem”. One could be “mymodem1”
with the other as “mymodem”.
modems cannot be called “mymodem”. One could be “mymodem1”
with the other as “mymodem”.
PPP/Ethernet
This group includes commands specific to PPP (serial) or
Ethernet connections between the Raven and a connected
device.
Ethernet connections between the Raven and a connected
device.