Siemens WD7005 Manual De Usuario
19
Frequent use of insufficient detergent will eventually
become noticeable as followings:
- washing appears grey or not properly clean
- grey-brown stains (grease marks) form on the
washing
become noticeable as followings:
- washing appears grey or not properly clean
- grey-brown stains (grease marks) form on the
washing
Too much detergent results in:
- unnecessarily high environmental pollution
- due to the generation of too much foam, the
washing is hard
-ly agitated which leads to poor washing results.
- unnecessarily high environmental pollution
- due to the generation of too much foam, the
washing is hard
-ly agitated which leads to poor washing results.
The amount of detergent indicated on its packaging
refers to a full machine load.
refers to a full machine load.
For small loads or less soiling, reduce the amount
of detergent.
of detergent.
Filling laundry detergent
and/or additive
dispensers
and/or additive
dispensers
- Do not fill beyond the Max mark, otherwise will
be flushed o the machine together with the
detergent at the start of the programme.
be flushed o the machine together with the
detergent at the start of the programme.
- If the liquid additive is thick, mix with a little water
before dispensing (prevents clogging of the overflow).
before dispensing (prevents clogging of the overflow).
Pull out the detergent dispenser up to the end stop.
Add the detergent and/or additive.
Close the detergent dispenser.
, ,
,,
Dispenser I:
Detergent for prewash or starch.
Detergent for prewash or starch.
Dispenser II:
Detergent for main wash, water softener, pre-
soaking agent, bleach and stain removal product.
Detergent for main wash, water softener, pre-
soaking agent, bleach and stain removal product.
Detergent
Cleaning product, e.g. Fabric softener or fabric
conditioner (do not fill above the lower edge of
the insert 1).
Cleaning product, e.g. Fabric softener or fabric
conditioner (do not fill above the lower edge of
the insert 1).