Siemens Outboard Motor S120 Manual De Usuario

 

Technical data and characteristics 

14

 

The technical data and characteristics for the 1FW6 Built-in torque motors are specified in 

this Chapter. This data collection provides the motor data required for configuration and 

contains a number of additional data for more detailed calculations for detailed analyses and 

problem analyses. Technical data subject to change.  

 

 

Note 
System-specific data refer to the combination of built-in torque motors 1FW6 with 

SINAMICS S120 drive systems. 
Unless otherwise specified, the following boundary conditions apply here: 
 

The DC link voltage U

ZK

 is 600 V, while the converter output voltage U

amax

 is 425 V. 

 

The motor is water-cooled with the recommended minimum flow rate according to the 

data sheet and a water intake temperature T

VORL

 of 35 °C 

 

The rated temperature of the motor winding T

N

 is 130 °C 

 

Voltages and currents are specified as rms values. 

 

Installation altitude of the motors up to 4000 m above sea level. 

 

For motors with integrated cooling, the performance data has been determined with the 

use of a cooling connection adapter. 

 

 

14.1 

Explanations of the formula abbreviations 

Content of the data sheet 

The data specified on the data sheets is explained in the following section. It is categorized 

as follows: 
●  Boundary conditions 
●  Rated data 
●  Limit data 
●  Physical constants 
●  Data for the motor cooler 

1FW6 Built-in torque motors 
Configuration Manual, 05/2009, 6SN1197-0AE00-0BP3 

175