Siemens HICOM 300 Manual De Usuario

Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / appendix.fm / 14.11.2008

Sc

hablone 200

4_12

_27

The specifications are subject to change.

The transmission 
rate is too low. For 
example, there are 
pixel errors with 
video streaming.

Radio data transmission depends on the operating environ-
ment, for example the building stock or the influence of other 
devices in the vicinity that also transmit in the 2.4-GHz fre-
quency range.

ì

Arrange your WLAN devices closer together.

ì

Change the orientation of your Gigaset USB Adapter 300, 
for example by using the delivered stand.

ì

Change the orientation of the access point.

ì

Position the device elsewhere.

ì

Switch off other radio sources in the vicinity. They may 
interfere with data transmission.

ì

Choose a different channel. You will find further informa-
tion in the user guide for your access point.

ì

Check to see if the problem also arises with a different type 
of encryption.

Compliance with 
standards

IEEE 802.11b/802.11g/802.11n (draft, see page 7)

Network modes

Ad-hoc mode
Infrastructure mode

Security properties

Support of SSID network identification for security
Support of data encryption using the
WEP algorithm (64-bit/128-bit)
WPA-PSK and WPA2-PSK encryption
Authentication with WPA
Wi-Fi Protected Setup (WPS)
Adjustment of transmission power
Further security settings in conjunction with routers (filter for 
MAC addresses, firewall, etc.)

Configuration and 
monitoring

Monitor for configuration and monitoring
Dynamic configuration
2 LED displays for operation and transmission states

Supported operating 
systems

Windows Vista, Windows XP or Windows 2000